Dexter 900BS2.52 Manuel D'instructions page 144

FR
8. TROUBLE SHOOTING
ES
Problem
PT
IT
Product does
not start
EL
PL
UA
Product does
RO
not reach full
power
EN
Unsatisfactory
result
9. PROTECT OUR ENVIRONMENT
Electrical products must not be thrown out with domestic waste. Recycle them at
the special disposal centers provided for the purpose. Contact your local authorities
or stockiest for advice on recycling.
The potential effects on the environment and human health as a result of the
presence of hazardous substances in electrical and electronic equipment.
For disposal, this tool also can be returned to the hardware store or vendor (or
Dexter dealer).
144
Possible cause
Not connected to power supply
Power cord or plug is defective
Other electrical defect to the product
Extension cord not suitable for
operation with this product
Power source (e.g. generator) has
too low voltage
Air vents are blocked
Sanding belt is worn
Sanding belt not suitable for work
piece material
Solution
Connect to power
supply
Check by a specialist
electrician.
Check by a specialist
electrician
Use a proper
extension cord
Connect to another
power source
Clean the air vents
Replace with a new
one
Use suitable sanding
belt