Publicité
Les langues disponibles
Les langues disponibles
2-R
ACK
10 Place Setting Load
3 saucers are
loaded on the
rack under the
Stack-Rack
Shelf
(select
models)
Upper Rack
Glasses, cups, stemware, light-weight plastics, plates,
bowls, pans, long-handled utensils etc. can be loaded
in this rack. Do not load glasses over the tines.
The Stack-Rack (select
models) on the right
side of the upper rack
folds up or down for
loading flexibility. Fold it
down to hold long-
handled knives, spatulas and spoons or short items
like cups or juice glasses. Fold it up for taller items like
glasses, bowls, plates, etc.
L
OADING
Upper Rack
Lower Rack
(
SELECT MODELS
The edge of the Stack-
Rack (select models) is
designed to hold
stemware in place. Taller
stemware will fit better on
the right side as the
upper rack is deeper on
this side.
The Folding Tines (select
models) located in the
front right corner provide
convenient loading space
for large, bulky items like
pots and pans or mixing
bowls.
To lower tines, carefully push the tines out of each
holder toward the center of the rack and lay the tines
down.
The Cup Clips (select
models) located in the
center of the upper rack
can be used to hold light-
weight plastic items,
cooking utensils, knives,
etc. in place. Clip the item
between the tine and the clip.
The Vari-Lock
™
Snugger
(select models) on the left
secures lightweight items
in place. It can be
adjusted by grasping the
wavy wire and rotating it
left to snug items against
the outer rack or to the
right to rest on top of light items. Do not load items
on top of the wire.
For best results with tall
glasses, rest the bottom of
the glass against the wavy
wire of the Vari-Lock
Snugger (select models).
4
)
™
Cont.
Publicité
