Beurer WL 50 Mode D'emploi page 44

7.6 Radio
The device has max. 30 memory spaces for radio stations.
1. To switch on the radio, press the Mode button twice. The current radio frequency will appear
on the display.
2. To begin or stop the automatic station search, press the
are automatically saved.
3. To switch between the individual stored stations, briefly press the
4. To set the volume, press and hold the
5. To switch the radio off, press the Mode button until the time appears on the display.
Note
To improve reception, plug the AUX cable into the AUX port or the USB-C cable into the
USB-C port. The AUX cable or USB-C cable acts as an antenna.
7.7 Setting the display brightness
The device has three display brightness levels.
• To set the display brightness, press the Display button.
100% -> 50% -> display off
OK
or the button (
44
button. Any stations found
or button.
).