Kenmore ULTRA WASH 665.1638 Serie Guide D'utilisation Et D'entretien page 7

%
Models 665.1638#, 665.1738#
CYCLES OPTIONS
• W_HING
Nm_ €:4i_ ................................. •
SENSING PANS WASH GENn.E RINSE • DRY1 N G
LOQ( _1 • SANm_D
248
eel •
HOU_
Model 665.1107395#
CYCLES OPTIONS 2 4
...... • ....... e o • t ..... .... ............ .... • • o ®
WASH £A_E_I_L PANS WA_N _£N:[LE WA_ HOU_;
LOOK O#_
WASHIN( StN N( DRYIN( SAN FZ[D (lEAN RINSE AfD MPqY
= color number
IJC[RA M eol l:lemeval
The ULTRA WASH ®Soil Removal System gives you sparkling
clean dishes, while using less energy and time. The ULTRA
WASH ® Soil Removal System includes:
• A heavy-duty grinder that acts as a food disposer to grind
and dispose of large food particles.
• An ULTRA WASH ®sensor to monitor soil level and adjust the
cycles as needed.
• An Automatic Temperature Control (ATC) that ensures the
proper water temperature for the selected wash cycle, and
soil level of the load.
• A Triple Action Filtration system that intermittently filters soil
from the wash water.
How the smar_ash
TM
Sensing System works
1. When the smartwash
TM
cycle is started, the smartwash
TM
Sensors detect the size of the dishload, the soil level, and the
water temperature in the dishwasher.
2. After the dishload size and soil level are determined, the
sensors automatically adjust the temperature and the amount
of water used for the load. This allows less water usage when
there is a smaller, less heavily-soiled dishload.
START-UP GUIDE
Before using your dishwasher, remove all packaging materials.
Read this entire Use and Care Guide. You will find important
safety information and useful operating tips.
1. Rinse aid is ESSENTIAL for good drying. Be sure to fill the
dispenser before you use your new dishwasher. Each filling
will last about 1 to 3 months depending on your usage.
2. Scrape large food soil and hard items (toothpicks or bones)
from dishes.
3. Properly load the dishwasher. (See "Dishwasher Loading.")
Load dishes with space in between so water will reach the
soiled surfaces. Make sure nothing prevents the spray arm(s)
from spinning freely.