Télécharger Imprimer la page

Kenmore ULTRA WASH 665.1638 Serie Guide D'utilisation Et D'entretien page 13

Publicité

Les langues disponibles

Les langues disponibles

1.
Press CANCEL. The Cancel light glows.
2. The dishwasher starts a 2-minute drain (if needed). Let the
dishwasher
drain completely. The light turns off after 2
minutes. The door must be closed for the dishwasher to
drain.
To stop the drain
You can press CANCEL again to stop the drain. Remember to
drain the dishwasher before starting a new cycle.
To clear the indicators
Press CANCEL before starting the dishwasher to clear all options
and cycles.
During the first minute of a cycle
1. Select a new cycle and/or options.
2. Check the detergent dispensers. They must be filled properly
for the new cycle.
3.
Make sure the door is closed. The dishwasher resumes the
new cycle and/or option after a 5-second pause.
After the first minute
of a cycle
1.
Press CANCEL. The Cancel light glows. Your dishwasher
starts a 2-minute drain (if needed). Let the dishwasher drain
completely.
2. Check the detergent dispensers. They must be filled properly
for the new cycle.
3.
Make sure the door is closed.
4. Select a new cycle and/or options.
5.
Press START.
Addb% )l:ems
a
e)e,F ,
You can add an item anytime before the main wash starts. Open
the door and check the detergent dispenser. If the cover is still
closed, you can add items.
To add items
1. Carefully open the door slightly to stop the cycle. Wait for the
spraying action to stop before opening the door.
2. Open the door. If the detergent dispenser cover is still closed,
add the item.
3. Close the door firmly until it latches. The dishwasher resumes
the cycle after about a 5-second pause.
You can customize your cycles by pressing an option. If you
change your mind, press the option again to turn the option off,
or select a different option if desired.
You can change an option anytime before the selected option
begins. For example, you can press an unheated drying option
any time before drying begins.
Press START to use the same cycle and option(s) as the previous
wash cycle.
NOTE: If the last cycle you completed
was a rinse cycle, when
you press Start, the dishwasher
runs the last full wash cycle and
options.
Hi Temp Wash
Select this option to increase the water temperature
during the
wash portions of the cycle. Hi Temp Wash raises the water
temperature to 145°F (63°C), in the main wash. Heating the water
helps improve washing results. Hi Temp Wash is useful when
loads contain baked-on food.
This option adds heat, wash time and may add water to the
cycle.
NOTE: Hi Temp Wash is an option with the Smart Wash (on some
models), Anti Bacterial, Pots Pans, and Normal Wash cycles.
Sani Rinse
Select this option to raise the water temperature
in the final rinse
to approximately
155°F (68°C). Sani Rinse adds heat and time to
the cycle. This high temperature
rinse sanitizes your dishes and
glassware in accordance with NSF/ANSl Standard 184 for
Residential Dishwashers. Certified residential dishwashers
are
not intended for licensed food establishments.
NOTE: The Anti Bacterial cycle automatically
uses this option.
Sani Rinse is an option with SmartWash (on some models), Pots
Pans, and Normal Wash. Only these sanitization cycles have
been designed to meet the NSF/ANSl requirements.
Air Dry
Select this option to dry without heat. Air drying is useful when
loads contain plastic dinnerware that may be sensitive to high
temperatures.
The dishes take longer to dry and some spotting can occur. For
best drying, use a liquid rinse aid. Some items (such as plastics)
may need towel drying.
NOTE: Air Dry is an option with all cycles, except Quick Rinse.
Lock On
Use the Lock On to prevent unintended
use of the dishwasher.
You can also use the lock feature to prevent unintended cycle or
option changes during a cycle.
When LOCK ON is lit, all buttons are disabled.
NOTE: The dishwasher door can be opened while the controls
are locked.
To turn on the Lock
Press and hold AIR DRY for 4 seconds. LOCK ON glows.
If you press any pad while your dishwasher
is locked, the light
flashes 3 times.
To turn off the Lock
Press and hold AIR DRY for 4 seconds. The light turns off.
Delay Hours
Select this option to run your dishwasher at a later time or during
off-peak hours. You can add items to the load anytime during the
delay countdown. After adding items, firmly close the door until it
latches. The delay will not continue if the door is not latched.
To delay the start
1.
Press DELAY HOURS until the desired number of 2, 4, or 8
hours is lit.
2. Select a wash cycle and options.
3.
Press START.
The selected Delay Hours light glows. The dishwasher
starts the
cycle in the selected number of hours.
NOTES:
TO cancel the delay and cycle, press CANCEL.
To cancel the delay and start the cycle, press DELAY HOURS
until no lights glow. Then press DELAY HOURS one more
time. The delay indicator turns off, and the delayed cycle
starts.
13

Publicité

loading

Ce manuel est également adapté pour:

Ultra wash 665.1738 serieUltra wash 665.1107395 serie