Publicité
LCD
Description
Display
The icon of each occupied
battery compartment and
low power indicator blinks
every half a second.
The auto-parking icon
blinks on the LCD.
Brake pedal icon is
displayed on the LCD.
Seat sensor icon is
displayed on the LCD.
PTO Switch icon blinks.
Fault
Mower
Code
Status
Beeper
on
Indicator
LCD
Flashes
Keeps
n/a
red
beeping
Keeps
n/a
OFF
beeping
n/a
OFF
No
n/a
OFF
No
n/a
OFF
No
Cause
Solution
The mower will stop
working immediately.
The battery
The operator should
parks are nearly
transport the mower
depleted.
to the battery charging
area for charging.
The mower is
parked on a slope
and the operator
Set the brake pedal at
leaves the mower
the braking position.
without setting
The auto-parking icon
the brake pedal
will be off and the
at the braking
sound indicator will
position, just
stop beeping.
with the steering
levers in the open
position.
The parking brake
Release it before
pedal is set at the
starting the mower.
braking position.
If with the operator
seated on the seat
, the icon is on,
stop operating the
The operator
mower immediately
leaves the seat or
and check the seat
seat switch is dis-
connection. If the seat
connected.
connection with the
mower is confirmed
correct, please contact
a qualified service
technician for repairs.
Before restarting the
mower, push the PTO
The blade motor
switch downward to
was interrupted in
disengage the deck
operation and the
motor. Please see
PTO switch is not
"TROUBLESHOOTING"
set to off position.
section in this manual
for reference.
ZERO TURN RIDE-ON MOWER — ZT5200E-L
EN
39
Publicité
