Publicité
EN
LCD
Description
Display
The temperature icon and
the exact occupied battery
compartment blink at the
same time.
The icons of each
occupied battery
compartment, low power
indicator, battery graphics
of fuel gauge blink every
1 second at the same
time on the LCD screen.
The first segment of the
LED fuel-gauge & status
indicator blinks too.
38
ZERO TURN RIDE-ON MOWER — ZT5200E-L
Fault
Mower
Code
Status
Beeper
on
Indicator
LCD
n/a
OFF
No
Keeps
beeping
Flashes
until the
n/a
red
PTO switch
is pushed
downward.
Cause
Solution
1. The mower can
continue working if
the combined battery
Ah rating, overheated
battery excluded, meets
the requirement. Once
the overheated battery
returns to normal
temperature, it will join
in powering the mower
The battery
immediately.
pack in the
cor- responding
2. If the combined
numbered battery
battery Ah rating not
compart- ment is
sufficient, the mower
overheated.
will not work until
more battery packs are
inserted into the vacant
battery compartments.
3. Reduce the load of
the mower by raising
the deck cutting height
or slowing down the
mowing when resuming
operation.
Stop working and return
to the battery charging
area.
NOTICE: When the
mower is in Limp-Home
mode, the blades are
automatically switched
The battery packs
into low rotation
are low on charge
speed without grass
and the mower
cutting and meanwhile
is in Limp-Home
the sound indicator
mode.
will keep beeping.
The operator should
push the PTO switch
downward to disengage
the deck blades. The
sound indicator will
stop beeping after blade
stopping.
Publicité
