Publicité
Les langues disponibles
Les langues disponibles
Install the Pipe Nipple (cont.)
Measure the distance from the end of the nipples to the surface of
the finished ceiling. Verify that the distance is at least 1-1/2" (38
mm) and no more than 1-3/4" (44 mm).
Remove the nipples.
Apply thread sealant to the threads of the nipples.
Reinstall the nipples to the tees/elbows.
Run water through the system to flush out any dirt or debris.
Kohler Co.
7
1207715-2-C
Publicité
