Publicité
Les langues disponibles
Les langues disponibles
Low-pass filter function is activated
UFC
Low-pass filter function is deactivated
End
OFF
Move to this position to turn the multimeter off
NCV
Non-contact AC voltage detection
EF
Display symbol in NCV mode
True RMS
Actual effective value
HOLD
Enable/disable data hold function
ZERO
Perform the zeroing with DC measurement (DC-A)
REL
Call up the relative value measurement and set the reference value (not possible for DC measurement,
continuity test, diode test and NCV)
SELECT
Key for function switching in multiple measuring functions
OL
Overload indicator; the measuring range was exceeded
Battery data symbol
Diode test function
Acoustic continuity test
AC
Alternating current symbol
DC
Direct current symbol
COM
Connection for reference potential
V
Voltage mode (Volt = unit of electrical voltage)
A
Current mode (Ampere = unit of electric current)
Ω
Resistance mode (Ohms = unit of electrical resistance)
Measuring function of capacitance measurement
Polarity direction plus pole for DC measurement (DC/A)
Polarity direction negative pole for DC measurement (DC/A)
Symbol for display illumination
41
Publicité
