EUROM 342765 Manuel D'utilisation page 33

3. Press on the
(swinging). Press once again and it will stop oscillating (swinging).
4. Press or
Note: When the set thermostat temperature is reached, the heating element switches
off and the fan remains on for 99 seconds. If the ambient temperature drops again
below the thermostat temperature, the heater will start to operate again.
5. The heater operates at high heating capacity whenever the ambient temperature is
more than 4°C below the set temperature.
6. The heater operates at low heating capacity whenever the ambient temperature is
more than 2-4°C below the set temperature.
7. Note: When the set thermostat temperature is reached, the heating element switches
off the fan remains on for 99 seconds. If the ambient temperature drops again below
the thermostat temperature, the heater will start to operate again.
8. Press on the
9. After switching off, the heater continues to cool for 99 seconds. The display counts
down the seconds.
10. To switch off the heater, press the main switch O (OFF) and then remove the plug
from the socket. Always keep the plug out of the socket when not using the heater!
11. Only for remote control: Press on
Wi-Fi and App operation
The heater can also be operated using an app. For that purpose, the heater must be
connected to a Wi-Fi modem.
1. Download the Eurom Smart App via the QR-code below or search for 'Eurom Smart' in
the APP store or Google play.
2. Follow the downloaded instructions.
3. To connect the appliance with the App, the Wi-Fi symbol must flicker rapidly:
To switch On the Wi-Fi function, press 3 seconds simultaneously on the
buttons on the appliance. The Wi-Fi light will start flickering.
To switch Off the Wi-Fi function, press again 3 seconds simultaneously on the
buttons of the appliance and the Wi-Fi light will extinguish.
If the Wi-Fi symbol on the device flashes slowly, press the Wi-Fi key
4. For more information about the App and how to connect to the App, see
http://www.eurom.nl/nl/manuals.
button (on the remote control
to set the desired temperature to 10-35°C.
button to stop the heater.
) and the heater will start oscillating
to switch off the control light.
33
and
and
for 3 seconds.