EUROM 342765 Manuel D'utilisation page 32

Remote control
a. ON/OFF
b. Heating capacity
c. ON/OFF control light
d. Oscillate / Swing
e. Lower temperature
f. Higher temperature
Installing and connecting
•
Remove all the packaging materials and keep out of children's reach. After removing
the packaging, check whether the appliance shows any damage or any signs of
faults/defects/failures. Do not use the appliance in case of doubt, but turn to your
supplier for checking /replacing.
•
Remove the protective foil of the battery holder. See illustration for replacing the
battery.
•
Choose an appropriate spot for the appliance, taking into account all the
precautionary measures stated in the user guide.
•
Check whether the control button is on OFF (O).
•
Unwind the entire electric cable and push the plug into an appropriate 220-240V
socket. To prevent overload, check whether there is no other appliance connected to
the same group.
•
Operate the heater by setting the main switch to I (ON). The heater is now on stand-
by. The display and control light are now blue.
•
From now on, the heater can be operated manually, with the remote control or with
an App.
Operation
Operating using the panel on the heater (manually) and the remote control
1. Press the button to start the heater. The fan starts to work and the display shows
the ambient temperature.
2. Press on the
•
1x pressing (low heating capacity): the display shows 1 sun and the fan symbol.
•
2x pressing (high heating capacity): the display shows 2 suns and the fan symbol.
•
3x pressing (back to fanning): the display shows the fan symbol.
button (on the remote control ) to change the mode:
32