Prior To First Use; Making Coffee; Switching Off - tomado TCM1501S Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 25
Before using the coffee machine for the first time, proceed as follows: Unpack the coffee machine and remove all packaging
material. Keep the packaging (plastic bags and cardboard) out of reach of children. After unpacking the appliance, carefully check
it for external damage that may have occurred during transport.
Place the coffee machine on a flat surface. It is best to clean the interior of the new coffee machine prior to using it for the first
time. This is done by filling the water reservoir with cold water and using the appliance two to three times without coffee.
Clean the glass jug and filter holder with hot soapy water, then rinse properly and wipe dry. Never use scouring sponges,
steel wool or other abrasives!
Important: Only use cold water for cleaning the inside of the coffee machine. Hot water has a negative effect on the coffee
machine's life span.
Check that the voltage stated on the information plate matches the voltage used in your region. Place the coffee machine on
a flat, stable surface. Insert the plug in an earthed wall socket.
1. Fold the cover of the water reservoir upwards and fill the reservoir using the glass jug until the required level
(the stripes indicate the number of cups). Do not fill the reservoir above the MAX indication. Close the cover.
2. Turn the filter holder open and place the permanent filter or a paper filter bag (size 1 x 4) with the edges folded.
This prevents the filter bag from folding inwards and closing. Add the required coffee (extra-fine grind) and softly shake it
to flatten out the coffee. For 10 cups, according to taste, you can use 5 to 6 measuring spoons of coffee, or 6 grams of coffee
per cup. In case of a smaller number of cups, you can change the amount of coffee accordingly.
3. Turn back the filter holder to close it.
4. Place the glass jug horizontally on the hot plate.
5. Then switch on the appliance by pressing the ON/OFF button on the operating panel. The indicator led lights up.
The hot plate under the glass jug is now switched on automatically.
6. Once the filter process has been completed, remove the glass jug from the hot plate and pour out the coffee.
7. Coffee tastes best immediately after it has been made, so do not wait too long before serving. The glass jug can immediately
be placed back on the hot plate or you can pour the coffee into a thermos jug.
Attention: This coffee machine comes with a drip stop. This means that the flow of coffee is stopped immediately when the
glass jug is removed. The filter holder is closed off, as a result of which the flow of coffee is stopped. Be sure to place back the
glass jug as quickly as possible to prevent the filter from overflowing. If you want to interrupt the coffee making process for
a longer period of time, press the on/off button to switch off the coffee machine. When making coffee, do not touch the cover
to prevent burns due to hot steam.
After use, always switch off the appliance by pressing the ON/OFF button. The indicator led switches off.
The coffee machine keeps the coffee warm for 40 minutes. After these 40 minutes the coffee machine switches off automatically.
Do not forget to remove the paper filter bag and throw it away or to remove the permanent filter and rinse it clean. Turn the
filter holder open and remove the filter. Throw away the filter bag. When using the permanent filter, empty it, clean it and use
it again.

PRIOR TO FIRST USE

MAKING COFFEE

SWITCHING OFF

EN - 15

Publicité

Table des Matières
loading

Table des Matières