Product Description; Operating Panel; Prior To First Use - tomado TPM1501B Mode D'emploi

Masquer les pouces

Table Des Matières

Table des Matières

Les langues disponibles

Hot plate

Operating panel

Removable cup grille

Floater

Removable leak tray

Steam pipe

Steam pipe handle

Attachment steam pipe

Removable water reservoir

10. Water hose

11. One-cup filter

12. Two-cup filter

13. Filter holder

14. Filter for coffee capsules

15. Filter holder for coffee capsules

16. Measuring spoon/tamper

2.1. Steam button

2.2 Coffee button

2.3 On/off button

2.4 Thermometer

2.5 Steam controller

2.6 Coffee indicator light,

lights up when the correct

coffee temperature has been reached

2.7 On/off indicator light,

lights up when the appliance

is switched on

2.8 Steam indicator light,

lights up when the correct

steam temperature has been reached

Before using the coffee machine for the first time, proceed as follows: Carefully unpack your coffee machine and remove all

packaging material and possible promotional stickers. Keep the packaging (plastic bags and cardboard) out of reach of children.

After unpacking the appliance, carefully check it for external damage that may have occurred during transport.

Place the coffee machine on a flat, stable and heat-resistant surface. Check that the voltage stated on the information plate

matches the voltage used in your region.

It is best to clean the interior of the new coffee machine prior to using it for the first time. This is done as follows:

• Slide the removable water reservoir out of the appliance. Fill the water reservoir with cold drinking water. Do not fill it above

the MAX mark. Slide the reservoir back into the appliance and place the water hose in the water reservoir.

• Place the one- or two-cup filter without coffee in the filter holder, making sure that the ball at the side of the filter falls

precisely into the indentation in the holder. Then place the holder in the appliance from the INSERT position and firmly turn