Eurosystems FT 92 Manuel D'utilisation Et D'entretien page 40

6.1. MAINTENANCE PLAN
When Who
Before each
Operator
use
After each
Operator
use
Every 10-15
hours of Operator
operation
Operator
Every 25-30
Service
hours of
centre eu-
operation
rosystems
spa
6.2. PROTECTION COVERS
Before the engine is started each time
check that the covers and casings, tools
and accessories are fitted properly and
are in perfect condition.
DANGER!
Replace damaged guards before using
the machine!
EN-14
What
Check the integrity of the
protective guards
Cleaning
Check the wear of the blades.
Check whether the blades are
deformed or damaged
Lubricate the swing pin
Sharpen the blades
Reference
Accessory operation and main-
tenance manual "PROTECTION
COVERS" paragraph
Accessory operation
and maintenance manual
"CLEANING" paragraph
if they are very worn or da-
maged, contact an authorized
centre to have them replaced
"GREASING" chapter in the
accessory's use and maintenan-
ce manual
if they are very worn or dama-
ged, contact a support centre to
have them replaced