Eurosystems FT 92 Manuel D'utilisation Et D'entretien page 39

DANGER!
To clean, use tools that are appropriate
according to the type of tool/accessory
that is being used (specific instructions
in the too o accessory user manual).
Pay attention to the cutting elements.
6. MAINTENANCE
In addition to observing the safety and
operational instructions it is just as impor-
tant to follow the following maintenance
instructions.
CARE!
Never carry out maintenance or clean-
ing operations with the engine on.
Before working on the accessory/tool
always remove the ignition key and/or
spark plug cap to prevent sudden or un-
expected starting.
CARE!
After the machine has come to a stop
cool the hot surfaces down for at least
15 to 20 minutes before approaching it.
CARE!
Always wear gloves, safety footwear,
glasses and use adequate work equip-
ment during maintenance of knives
and/or other sharp parts.
CARE!
Do not carry out repairs involving weld-
ing, drilling, grinding etc. on structural
components and safety devices.
Only use genuine Eurosystems parts. All
the other commercial parts must corre-
spond to the technical and quality specifi-
cations determined by Eurosystems.
EN-13