Télécharger Imprimer la page

Eurosystems FT 92 Manuel D'utilisation Et D'entretien page 34

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 65
base of the pallet and remove it com-
pletely by raising it;
• Cut any ties on the bottom;
4.3. LIFTING
[ fig. 01]
DANGER!
Only use systems, devices and instru-
ments that are suitable for lifting mass-
es that are equal or above what is in-
dicated in the "Machine Specifications"
chapter.
DANGER!
Do not walk or remain under moving
loads.
CARE!
Do not use lifting systems or devices
with sharp parts.
DANGER!
Before using lifting ropes or bands,
check how strong they are. In case of
damage, even partial they must be re-
placed.
CARE!
Never lift the machine when it is con-
nected to an accessory or tool.
Lift the accessory with a hoist or similar
equipment with a minimum capacity as
EN-8
specified in the "Accessory specifications"
chapter. Attach as shown in
(hooking bars).
4.4. HANDLING
Move the accessory only when attached
to the P130 machine.
If you have a van with crane equipped with
a lifting crane, follow the lifting instructions
indicated in the previous paragraph.
DANGER!
Never lift the accessory when attached
to the machine.
5. INSTRUCTIONS FOR USE
DANGER!
Before using the machine read and un-
derstand carefully this operation and
maintenance manual and the machine's
operation and maintenance manual.
5.1. FINISHING THE ASSEMBLING OF
THE WHEEL
[ fig. 05, 06, 07 ]
The transfer wheel (2), the two ballasts (4)
and the mulching cover (5) are not moun-
ted on the accessory (1). To assemble the
wheel
[Fig.
06]: take the spring (6), the
spacer (7), the cotter pin (8), the spring
[12 , fig. 01] .

Publicité

loading