Publicité
Les langues disponibles
Les langues disponibles
Introducing my Board Buddy AIR
Thank you for choosing the my Board Buddy AIR as solution for duplicating a digital projection
or smartboard. The image is retransmitted wirelessly via a transmitter to a monitor close to the
user.
my Board Buddy is a stand-alone or complementary solution for school facilities used by visually
impaired children and students.
my Board Buddy is easy to use thanks to a joystick that requires no prior knowledge of
computers, meaning it can be used by children as young as 6.
Package contents
The kit you received contains the following items:
Transmitter my Board Buddy AIR
•
•
my Board Buddy AIR receiver
Operation
•
Electric adapters
•
VESA mounting plate + screws
•
•
Instruction manual
Always check beforehand that all components
be there!
Care and maintenance
Clean your my Board Buddy with a damp, well-wrung cloth (NEVER use a wet blanket). Never
use corrosive products: this will cause irreparable damage to the casing.
Keep the packaging in which my Board Buddy was delivered. The device can only be shipped in
this packaging.
Always leave my Board Buddy enough space (± 10 cm) to allow air to circulate through the
openings. Never cover the grid: you risk overheating the unit.
Use only the mains adapter supplied. Use of an incorrect type may damage the unit.
Never switch on the device if it has been exposed to water.
Place all cables in such a way that no-one can trip over them or pinch them.
13
Publicité
