Annexes
3.
Press Arrow up (no. 4) once to change the digit to 2.
4.
Press Arrow right (no. 1) again → passcode required → press the buttons: 1-2-3-4-1-2,
see Fig. 41.
Fig. 41
Example: how to change a parameter in the supervisor menu
Change of gas constant 2.5.3 to value according to the list in . If in doubt, choose the lowest
value belonging to the lower end of your operating range.
1.
Change the text in the upper line in the display to 2.5.3:
•
Press Arrow right (no. 1) – the second digit is marked, see Fig. 42.
Fig. 42
•
Press Arrow up (no. 4) until 1 has turned to 5.
•
Press Arrow right (no. 1) – the third digit is marked, see Fig. 43.
Fig. 43
Mode d'emploi – Refroidisseur PAC
005730 fr 10/2022
69/77