LENCO Xemio-280 Mode D'emploi page 8

Warning:
Better use the original USB cable delivered with your MP3 player. This
cable is a data and charging cable. Some other USB cables in the market
are charging only cables. If you use a charging only cable to transfer data
from your computer to your player, it will only show the battery symbol
on the screen and will not be detected by your computer as an external
drive; this means that you cannot transfer any files from your computer to
your MP3 player.
Note :
The player contains a built-in temperature monitor sensor. If it senses that
the battery pack temperature is not in good condition it will control and
stop the charging function. The charging function will be automatically
restored when the detected battery pack temperature returns to within
normal limits.
a. Charging the Battery:
You can charge the player battery in two ways:
•
Connect player to your computer. Or,
•
Use the USB power charger. (not included)
b. Connection and Charging:
•
Once you have connected player with computer/power charger, then
you will see the "Choose connection" screen appear to choose and it
will switch to "Charge & Transfer" mode automatically if no action in
4 ~ 6 seconds.
•
Choose "Charge & Transfer" to upload or download the media files
with your computer and charging the Player's battery.
•
Choose "Charge & Play" to operates the Player's function and the
battery charging in background.
•
The level bars are running in battery icon at the connecting screen. The
battery is in charging.
"Choose connect type"
Important: The battery does not charge when your computer is in sleep.
"Charge & Transfer"
8
"Charge & Play"