Sharp PN-465E Mode D'emploi page 36

Product Specifications
Model
LCD element
Max. resolution
Max. colours
Pixel pitch
Viewing angle
Screen active area
Computer input signal
Sync signal
Video colour system
Plug and play
Power management
Input terminals
Output terminals
Power requirement
Operating temperature
Operating humidity
Power consumption
Dimensions
Weight
*1 Cannot be used simultaneously.
*2 Does not support plug and play.
*3 Connection is allowed with an HDCP-compatible device only. Does not support Repeater control function.
As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for
product improvement without prior notice. The performance specification figures indicated are nominal values of production
units. There may be some deviations from these values in individual units.
34
E
Specifications
PN-465E
46" wide (116.8 cm diagonal) ASV low-reflection black TFT LCD
(pixels) 1920 x 1080
16.77 M colours (8 bits/colour)
0.53025 mm (H) x 0.53025 mm (V)
176° right/left/up/down (contrast ratio ≥ 10)
(mm) 1018.1 x 572.7
Digital (DVI 1.0 standard-compliant), Analogue RGB (0.7 Vp-p) [75 Ω]
Horizontal/vertical separate (TTL: positive/negative), Sync-on-green,
Composite sync (TTL: positive/negative)
PAL, PAL-60, SECAM, NTSC (3.58 MHz), NTSC (4.43 MHz)
VESA DDC2B
VESA DPMS, DVI DMPM
PC/AV Digital
PC Analogue
Audio
AV Composite video
Component
Audio
Serial (RS-232C)
PC/AV Digital
Audio
Serial (RS-232C)
Speaker
AC 100 V - 240 V, 50/60 Hz
0°C to 40°C
20% to 80% (no condensation)
266 W (Input signal waiting mode: 7 W, Standby mode: 4 W)
(mm) Approx. 1,113 x 140 x 657 (excluding protrusions)
(kg) Approx. 35.5 (excluding the temporary stand)
DVI-D 24 pin (HDCP compatible) x 1
Mini D-sub 15 pin, 3 rows x 1, BNC
3.5 mm mini stereo jack x 1
BNC x 1
BNC (Y, Cb/Pb, Cr/Pr) x 1
*1
RCA pin (L/R) x 1
D-sub 9 pin x 1
DVI-D 24 pin x 1
*3
RCA pin (L/R) x 1
D-sub 9 pin x 1
7 W + 7 W [6 Ω]
x 1
*1*2