Publicité
Les langues disponibles
Les langues disponibles
Multiple PIDs may be sent if vehicle is equipped with more than one
computer module (for example a powertrain control module [PCM]
and a transmission control module [TCM]. The Tool identifies them
by their identification names (ID) assigned by manufacturer (i.e. $10
or $1A). See PID Definitions for more information.
If one or more control modules stop responding, the Tool displays a
message:
‰ If continuing , dashes will replace data in right hand column.
‰ If NO is selected, the Tool will attempt to re-establish
communication with that module.
Entire Data List
Selecting Entire Data List from the Select Data to View menu will
show all supported PID data for the vehicle being tested.
T h e Select Data to View menu will show all supported PID data for
the vehicle being tested.
From the Select Data to View menu:
1.
View PIDs on Tool. Use the
UP or DOWN arrow
key. See PID Definitions for
more information.
2.
If the "
" icon displays while
gR
a PID is selected, press
ENTER to view graph.
Press BACK to return to PID screen.
3.
4.
Press BACK again to Select Data to View menu.
5.
Press BACK again to return to Diagnostic Menu.
Select Data to View
=========================
Entire Data List
Custom Data List
Long PID Names
English / Metric
"
A/C PRESS (psi) 15.5
A/C PRESS (V)
A/F RATIO
BARO PRESS ("Hg)29.9
ABSLT TPS
ENGINE (RPM)
CALC LOAD (%)
MAF (LB / M)
9
3.00
14:1
12.2
2352
83.1
0.57
Publicité
