Actron AutoScanner OBD II Guide De Mise À Jour page 8

keys, then press
Setup.
View Data
The View Data function allows real time viewing of the vehicle's
computer module's PID data. As the computer monitors the vehicle,
information is simultaneously transmitted to the Tool.
View Data allows the following items to be viewed on the Tool:
‰ Sensor data
‰ Operation of switches
‰ Operation of solenoids
‰ Operation of relays
View Data is shown as:
‰ Entire Data List
Apart from the Read Codes, View Data is the most useful diagnostic
function for isolating the cause of a vehicle operation problem.
From the Diagnostic Menu:
Select View Data. Use the
1.
 UP or  DOWN arrow
key until View Data is
highlighted. Press
ENTER.
2. Observe while Tool valida-
tes PID MAP.
PID MAP validation is the tool asking the vehicle which PIDs are
supported. See PID Definitions for a complete list of PIDs supported
by the tool.
ENTER to save or BACK to return to System
8
Diagnostic Menu
=========================
I/M Monitors
Read Codes
Erase Codes
MIL Status
State OBD Check
View Data
Validating PIDs
======================
PID X/Y
es
Please Wait
