Publicité
Les langues disponibles
Les langues disponibles
Smart Response® Technology
This feature allows the thermostat to "learn" how long the furnace and air
conditioner take to reach programmed temperature settings, so the temperature
is reached at the time you set. For example: Set the Wake time to 6 am, and the
temperature to 70°. The heat will come on before 6 am, so the temperature is 70°
by the time you wake at 6. The message "Recovery" is displayed when the system is
activated before a scheduled time period.
Battery replacement
Batteries are required to provide power. Install fresh batteries immediately when
the low battery icon appears. The icon appears about two months before the
batteries are depleted.
Even if the low battery icon does not appear, you should replace
batteries once a year, or before leaving home for more than a month.
If batteries are inserted within two minutes, the time and day will not have to be
reset. All other settings are permanently stored in memory, and do not require
battery power.
NOTE: When replacing batteries, alkaline batteries are recommended.
Setting the time
1
Press Menu to enter the device menu.
You will see PROG. Press + or - to
choose TIME.
2
Press Select.
3
12HR is displayed. Press + or - to
choose a 12 hour clock or a 24 hour
clock. Press Select.
4
Set the time. Press + or - to adjust
the hour. Press Select.
5
Press + or - to adjust the minutes.
Press Select.
6
Press Select to save and exit.
15
Série RTH7500
M36010
Publicité
