Sponge Filter - Makita DCL280F Manuel D'instruction

Occasionally wash the HEPA filter in water, rinse and
dry thoroughly in the shade before use. Never wash the
filter in a washing machine.

Sponge filter

When the sponge filter becomes dirty, clean it as follows.
1. Remove the filter.
2. Pull out the sponge filter from between the pillars.
3. Clean the sponge filter by tapping or washing. If
you wash it, dry it out thoroughly before use.
4. Insert the sponge filter between the pillars and set it
in the original position. Make sure that each bottom edge of
the pillar holds down the sponge filter, and there is no gap
between the sponge filter and suction opening.
► 1 . Sponge filter 2. Bottom edge of pillar
Wall mount for cordless cleaner
Optional accessory
NOTE: The screw to mount the holder is not included.
Prepare a screw which fits with the material to screw
into.
Attach the wall mount for cordless cleaner to a hard
wooden wall, beam or column, where the wall mount
for cordless cleaner can be firmly secured. Always be
sure that the wall mount for cordless cleaner is securely
attached before hanging the cleaner.
► 1 . Wall mount for cordless cleaner
CAUTION:
mount violently or hang other appliances than the
cleaner.
1
2
13 ENGLISH
1
Do not hang the cleaner to the wall