Masterflex L/S MFLX07519-10 Notice D'utilisation page 14

PUMP HEAD
Speed Range:
Models 07519-10 and 07519-20:
Models 07519-15 and 07519-25:
Operating Temperature Range:
Storage Temperature Range:
Noise level:
Construction and
Chemical Resistance:
Compliance:
CARTRIDGES
Construction:
Dimensions:
Large:
Small:
Use only MASTERFLEX Precision Tubing and Microbore Tubing Sets with MASTERFLEX Pumps to ensure opti-
mum performance. Use of other tubing may void applicable warranties.
The Manufacturer warrants this product to be free from significant deviations from published specifications. If repair or
adjustment is necessary within the warranty period, the problem will be corrected at no charge if it is not due to misuse or
abuse on your part as determined by the Manufacturer. Repair costs outside the warranty period, or those resulting from
product misuse or abuse, may be invoiced to you.
The warranty period for this product is two (2) years from the date of purchase.
To limit charges and delays, contact the seller or Manufacturer for authorization and shipping instructions before return-
ing the product, either within or outside of the warranty period. When returning the product, please state the reason for
the return. For your protection, pack the product carefully and insure it against possible damage or loss. Any damages re-
sulting from improper packaging are your responsibility.
If you have any questions about the use of this product, contact the Manufacturer or authorized seller.
SPECIFICATIONS
ROTOR
0–250 rpm
0–120 rpm
0° to 40°C (32°F to 104°F)
–40°C to 60°C (40°F to 140°F
<70 dBA @ 1 meter
Fiberglass-reinforced polysulfone housing; stainless steel
rotor assembly with PTFE based plastic rollers,
sealed stainless steel ball bearings, stainless steel
structural parts and Buna N safety guard.
EN809 (EU Machinery Directive)
Durable polycarbonate frame with filled nylon and acetal
components: filled polysulfone occlusion bed; anodized
aluminum adjustment knob on stainless steel screw,
FKM O-ring.
4 in H x 5 in W x 0.72 in Thick
(102 mm x 127 mm x 18.3 mm)
4 in H x 5 in W x 0.36 in Thick
(102 mm x 127 mm x 9.1 mm)
WARRANTY
PRODUCT RETURN
TECHNICAL ASSISTANCE
12
DRIVE
0–250 rpm
0–600 rpm
Printed in U.S.A.