Maintenance Instructions; Technical Specifications; Declaration Of Conformity - Alecto BW-71 Mode D'emploi

MAINTENANCE INSTRUCTIONS

Cleaning:
Disconnect the Baby Bottle Warmer from the mains socket (or the cigarette
lighter socket) and allow it to cool down. Clean the container and the outside of
the Baby Bottle Warmer with a damp cloth.
Never immerse the Baby Bottle Warmer in water. Do not use cleaning or
scouring agents.
Decalcify:
Hard water deposits must be removed. To do this use white vinegar only. Pour
the vinegar into the tank at mid-level, allow to rest until the hard water deposits
have been completely eliminated. Rinse well and wipe with a damp cloth.
Warning:
If a fault occurs, consult the Alecto service centre at telephone number
+31 (0) 73 6411 355. Under no circumstances should you try to repair the Baby
Bottle Warmer yourself; do not dismantle. Servicing should be performed by
qualifi ed service personnel only.

TECHNICAL SPECIFICATIONS

Power supply : 220-240V AC
Power consumption : 95 Watts
Operational ambient temperature : between +7ºC and +37ºC
Heating system: PTC with temperature controlled protection
ENVIRONMENT
At the end of the product lifecycle, you should not throw this product
into the normal household garbage but bring the product to a collection
point for the recycling of electrical and electronic equipments.

DECLARATION OF CONFORMITY

The declaration of conformity is available on the website
WWW.ALECTO.INFO
15