Alecto BW-71 Mode D'emploi page 13

GB
The fi nal temperature of the milk is determined by the amount of water in the bot-
tle warmer. If the temperature is too high, it is recommended to use less water in
the bottle warmer.
It is recommended to fi ll the interior space with water only after placing the bottle
inside. Before the fi rst use, fi ll with water by no more than half the height of the
milk within in the bottle, it is also advised to regularly take out the bottle and shake
well for an even heating of the content.
Check the temperature of the contents on the back of the hand fi rst before feeding
it to the baby, to ensure that the temperature of the bottle contents are safe for
your baby. If the temperature is too hot, use less water in the inside of the bottle
warmer and vice versa.
Place the (partly) fi lled bottle
inside of the bottle warmer.
Fill the remaining space within
the bottle warmer to half the
height of the contents within
the bottle with water.
13