Maintenance Instructions; Technical Specifications - Alecto BW-512 CAR Mode D'emploi

When used in your car:
Slide the switch on the backside of the bottle warmer into the position 12VDC and
use the included 12V cable with car plug when warming the water of the bottle
warmer.
Do not use while driving, please put the car aside the road but keep the engine
running (high power consumption of 5A). Only use the provided 12V cable.
Cleaning:
Disconnect the Baby Bottle Warmer from the mains socket (or the
cigarette lighter socket) and allow it to cool down. Clean the container
and the outside of the Baby Bottle Warmer with a damp cloth.
Never immerse the Baby Bottle Warmer in water. Do not use cleaning or
scouring agents.
Decalcify:
Hard water deposits must be removed. To do this use white vinegar
only. Pour the vinegar into the tank at mid-level, allow to rest until the
hard water deposits have been completely eliminated. Rinse well and
wipe with a damp cloth.
Warning:
If a fault occurs, consult the Alecto service centre at WWW.ALECTO.NL
Under no circumstances should you try to repair the Baby Bottle
Warmer yourself; do not dismantle. Servicing should be performed by
qualified service personnel only.
Power supply: 220-240V AC / 12V DC
Power consumption: 500 Watts / 100 watts
Operational ambient temperature: between +7ºC and +37ºC
Heating system: Die-cast heating element with temperature controlled protection
24 months guarantee
At the end of the product lifecycle, you should not throw this product into
the normal household garbage but bring the product to a collection point for
the recycling of electrical and electronic equipments.

MAINTENANCE INSTRUCTIONS

TECHNICAL SPECIFICATIONS

ENVIRONMENT
15