Ego Power+ HT2400 Manuel De L'opérateur page 20

SIDE CUTTING
When trimming the sides of the hedge, begin at the bottom and cut upwards
(see Fig . 8) . Trim the side of a hedge so that it will be slight narrower at the top .
This shape will expose more of the hedge, resulting in a more uniform growth .
8
MAINTENANCE
WARNING:
other parts may create a hazard or cause product damage . To ensure safety and
reliability, all repairs should be performed by a qualified service technician .
CLEANING
WARNING:
from the product when cleaning or performing any maintenance .
 Use a soft brush to remove debris from all air intakes and cutting blade .
 To remove pitch and other sticky residue, spray the blades with resin solvent .
Run the motor briefly so that the solvent is event distributed .
 Wipe the surface with a dry cloth .
20
56V LITHIUM-ION CORDLESS HEDGE TRIMMER — HT2400/HT2400-FC
When servicing, use only identical replacement parts . Use of any
To avoid serious personal injury, always remove the battery pack