Publicité
Les langues disponibles
Les langues disponibles
Blade Guard
The blade guard keeps the operator from coming in contact with the sharp blades
when the tool is not in use . It also helps keep the blades from being nicked or
damaged when the tool is in storage .
Battery-Release Button
Press to release the battery pack from the tool .
Latch
Locks the battery pack in place when installed on the tool .
Ejection Mechanism
Aids in removing the battery .
Mounting Slot
Guides the battery pack .
OPERATION
WARNING:
Remember that a careless fraction of a second is sufficient to inflict serious injury .
WARNING:
ANSI Z87 .1, along with hearing protection . Failure to do so could result in objects being
thrown into your eyes and other possibly serious injuries .
WARNING:
manufacturer of this product . The use of attachments or accessories not recommended
can result in serious personal injury .
Before each use, inspect the entire product for damaged, missing, or loose parts, such
as screws, nuts, bolts, caps, etc . Tighten securely all fasteners and caps and do not
operate this product until all missing or damaged parts are replaced .
APPLICATION
You may use this product for the purposes listed below:
Trimming and the forming of hedges, shrubs, and bushes with a branch diameter
of less than 3/4" (19mm)
56V LITHIUM-ION CORDLESS HEDGE TRIMMER — HT2400/HT2400-FC
Do not allow familiarity with this product to make you careless .
Always wear eye protection with side shields marked to comply with
Do not use any attachments or accessories not recommended by the
15
Publicité
