Publicité
Les langues disponibles
Les langues disponibles
G H
14. Tighten the screws.
15. Attach the part (H) to the part (G).
16. Disconnect the parts (Ha), (Hb), (Hc) and (Hd).
Ha
Hb
Hc
Hd
17. Install the part (Ha) on the inner side of the kitchen
furniture.
~50 mm
o
90
21 mm
o
90
~50 mm
21 mm
18. Push the part (Hc) on the part (Ha).
Ha
Hc
19. Open the appliance door and the kitchen furniture
door at an angle of 90°.
20. Insert the small square (Hb) into guide (Ha).
21. Put together the appliance door and the furniture
door and mark the holes.
8 mm
Hb
Ha
22. Remove the brackets and mark a distance of 8 mm
from the outer edge of the door where the nail must
be fitted (K).
8 mm
K
Ha
23. Place the small square on the guide again and fix it
with the screws supplied.
24. Align the kitchen furniture door and the appliance
door by adjusting the part (Hb).
Hb
25. Press the part (Hd) on the part (Hb).
Hb
Hd
Do a final check to make sure that:
•
All screws are tightened.
•
The sealing strip is attached tightly to the cabinet.
•
The door opens and closes correctly.
25
Publicité
