Télécharger Imprimer la page

Whirlpool CABRIO Guide D'utilisation Et D'entretien page 12

Secheuse a gaz

Publicité

Les langues disponibles

Les langues disponibles

3. Loosen the top screw from each of the 2 hinges in Step 2.
A
B
.A
"B
Reverse the strike
1. Remove the door strike from the dryer door opening.
2. Remove the cosmetic screw opposite the door strike.
A. Loosen these screws.
B. Remove these screws.
4. Remove the dryer door and the hinges by lifting upward on
the door. Lay the door on a flat, protected
surface, with the
inside of the door facing up. Remove remaining 2 loose
screws from dryer front panel.
5. Remove the 4 plastic plugs located outside the dryer door
opening.
6=
I
Install 4 plastic plugs into screw holes in the dryer left where
the hinges were removed in Step 4.
A. Door strike
B. Cosmetic screw
3. Reinstall the door strike and cosmetic screw on the opposite
side of the dryer door opening from where they were
removed.
NOTE: Door strike and plugs must be on the same side of the
dryer door opening.
Reinstall the door
1. Remove the 4 screws and 2 hinges from the dryer door.
2. Replace the 4 screws in the same holes.
3. Remove the 4 screws from the opposite side of the door.
I
12

Publicité

loading