Volpi KV300 Mode D'emploi page 33

•
When operating the tool, keep the other hand and any other part of your body at a minimum
distance of 15cm from the blade;
•
Keep all other people at a minimum distance of 1.5m
•
Blade will be hurt or jammed if cutting bigger branch
•
Do not move the tool during the pruning shear cutting, it can cause danger.
•
Do not use the device in rain or humidity environment.
•
Switch off the device after use and remove the battery from the pruner.
Caution: please check battery charge level or blade sharpening when cutting is difficult or not
smooth.
15. Maintenance and cleaning
Tools to be repaired must be sent to Customer Assistance Service. Use original part keeps the
tool good condition and safe.
Disconnect the battery from the tool before checking, maintaining and repairing the pruning
shear, to avoid risk of unexpected activation of the tool.
Please wear glove before you check the blade is sharp or not, that is to avoid blade hurt you.
Check the pruning shear frequently, this will keep tool safe and reliable.
•
Do not flush the tools or put it in water, it will cause short circuit or damage the device.
•
Keep ventilation, motor and handle cleaning, always use feather clean the device. Do not use
cleanser flush device, it will rust parts.
forcedly.
33