Volpi KV300 Mode D'emploi page 31

•
Need to replace battery if battery running time is not enough. Users can only use the original
equipment manufactured by the customer center (OEM) battery pack.
•
Keep safety rules and environment protection information in mind all the time.
10.1. Battery charging procedure.
•
Charge at temperature of ＋ 10°C~ ＋ 22°C indoor.
•
Put the battery into the charger correctly.
•
Make sure specifications on battery and adapter matched before charging.
•
Red LED light on the charger indicates the battery is charging, green LED light indicates fully
charged, average charging time is about 2,5 hours.
•
Please make sure the battery charged at least once every 6 months when the battery is not using.
11. Working environment
• Keep temperature of environment at 10°C ~ 22°C when charging battery, 0°C ~ +45°C when battery
is working.
• Keep tool at temperature of 0°C ~ 60°C when working
• Do not use in explosive atmosphere or near flammable substances or gases.
• Do not use in case of rain or on wet branches
12. Assembly
Check that the pruning shears and batteries are clean and dry, and then place the battery in the battery
compartment on the pruner.
31