Publicité
Les langues disponibles
Les langues disponibles
CONTENTS
Page
Contents
4
Assembly overview
15
Important recommendations and safety instructions
16-17
Assembly instructions
18
Use of the device
18
RPM and power level
19-21
Computer
22
Cleaning, checks and storage
22
Troubleshooting
23
General training instructions
24-25
Parts list – Spare parts list
50-51
Exploded drawing
IMPORTANT RECOMMENDATIONS AND SAFETY INSTRUCTIONS
Our products are all TÜV-GS tested and therefore represent the
highest current safety standards. However, this fact does not make
it unnecessary to observe the following principles strictly.
1.
Assembly the machine exactly as described in the installation
instructions and use only the enclosed, specific parts of the
machine. Before assembling, verify the completeness of the
delivery against the delivery notice and the completeness of the
carton against the assembly steps in the installation and operating
instructions.
2.
Before the first use and at regular intervals (approximately
every 50 Operating hours) check the tightness of all screws, nuts
and other connections and the access shafts and joints with some
lubricant so that the safe operatingcondition of the equipment is
ensured. In particular, the adjustment of saddle and handlebar need
smooth function and good condition.
3.
Set up the machine in a dry, level place and protect it from
moisture and water. Uneven parts of the floor must be compensated
by suitable measures and by the provided adjustable parts of the
machine if such are installed. Ensure that no contact occurs with
moisture or water.
4.
Place a suitable base (e.g. rubber mat, wooden board etc.)
beneath the machine if the area of the machine must be specially
protected against indentations, dirt etc.
5.
Before beginning training, remove all objects within a radius of 2
metres from the machine.
6.
Do not use aggressive cleaning agents to clean the machine
and employ only the supplied tools or suitable tools of your own
to assemble the machine and for any necessary repairs. Remove
drops of sweat from the machine immediately after finishing training.
7.
Attention! Systems of the heart frequency supervision can be
inexact. Excessive training can lead to serious health damage or
to the death. Consulta doctor before beginning a planned training
programme. He can define the maximum exertion (pulse, Watts,
duration of training etc.) to which you may expose yourself and
can give you precise information on the correct posture during
training, the targets of your training and your diet. Never train
after eating large meals. This item is not suitable for therapeutically
purposes!
8.
Only train on the machine when it is in correct working order.
Use original spare parts only for any necessary repairs. Attention!
Replace the worm parts immediately and keep this equipment out of
use until repaired.
9.
When setting the adjustable parts, observe the correct
position and the marked, maximum setting positions and ensure that
the newly adjusted position is correctly secured.
10.
Unless otherwise described in the instructions, the machine
must only be used for training by one person at a time. The exercise
time should not overtake 90 min/daily.
11.
Wear training clothes and shoes which are suitable for fitness
training with the machine. Your clothes must be such that they
cannot catch during training due to their shape (e.g. length). Your
training shoes should be appropriate for the trainer, must support
your feet firmly and must have non-slip soles.
12.
Attention! If you notice a feeling of dizziness, sickness, chest
pain or other abnormal symptoms, stop training and consult a
doctor.
DEAR CUSTOMER,
We congratulate you on your purchase of this home training
sports unit and hope that we will have a great deal of pleasure
with it. Please take heed of the enclosed notes and instructions
and follow them closely concerning assembly and use. Please
do not hesitate to contact us at any time if you should have any
questions.
13.
Never forget that sports machines are not toys. They must
thereforeo nly be used according to their purpose and by suitably
informed and instructed persons.
14.
People such as children, invalids and handicapped persons
should only use the machine in the presence of another person
who can give aid and advice. Take suitable measures to ensure that
children never use the machine without supervision. Ensure that the
person conducting training and other people never move or hold any
parts of their body into the vicinity of moving parts.
15.
It must be ensured that the user and other people never go or
stand with any body parts in the area of still moving parts.
16.
At the end of its life span this product is not allowed to
dispose over the normal household waste, but it must be given
to an assembly point for the recycling of electric and electronic
components. You may find the symbol on the product, on the
instructions or on the packing. The materials are reusable in
accordance with their marking. With the re-use, the material
utilization or the protection of our environment. Please ask the local
administration for the responsible disposal place.
17.
To protect the environment, do not dispose of the packaging
materials, used batteries or parts of the machine as household
waste. Put these in the appropriate collection bins or bring them to a
suitable collection point.
18.
For speed dependent operation mode, the braking resistance
level can be adjustable manually and the variations of power will
depend on the pedaling speed. For speed independent operation
mode, the user can set wanted power consumption level in Watt,
constant power level will be kept by various braking resistance
levels, that will be determined automatically by system. That is
independent on the pedaling speed.
19.
The unit has a resistance device with 24 levels. This makes it
possible to increase or reduce the braking resistance and thus the
amount of effort required in the training. Pressing the button with
„-" reduces the braking resistance and thus the amount of effort
required in the training. Pressing the button „+" increases the
braking resistance and thus the amount of effort required in the
training.
20.
This machine has been tested in compliance with wird EN ISO
20957-1:2013 and EN ISO 20957-5:2016 „H/A". The maximum
permissible load (=body weight) is specified as 150 kg. The
classification of HA means this exercise bike is designed for home
use only and with good accuracy class, the variations of power
consuming are within ±5W up to 50W and ±10% over 50W. This
item's computer corresponds to the basic demands of the directive
of 2014/53/EU (RED).
21.
The assembly and operating instructions is part of the
product. If selling or passing to another person the documentation
must be provided with the product.
15
Top-Sport Gilles GmbH
Attention!
Before use
read operating
instructions!
GB
Publicité
