Camera - Abus TVIP70000 Manuel Utilisateur

6.2 Camera

Display Setting
Date & time: Activate this selection box to display the date and time in the live view.
Weekday: Activate this selection box to show the weekday in the live view.
Date format: Select the desired date format for the display from the list.
OSD Status: Select a display mode for the elements (date and time, week and camera name) in the
on-screen display.
Accept the settings by pressing "Save".
Video Setting
Values for both different video streams can be specified here (e.g. bit rate or resolution).
Stream type:
Channel name:
Video Codec type:
Resolution:
Image quality:
Stream type:
Max. Bitrate:
Frame Rate:
Multicast Address:
RTSP Port:
Mirror:
Exposure Mode:
Max. Exposure Time:
Gain:
Accept the settings by pressing "Save".
Stream 1 -> Main stream for local display and storage
Stream 2 -> Sub-stream for mobile access
All values listed under Stream 1 and 2 can be specified individually for each of the
two streams.
A description can be entered here for the camera. A maximum of 12 characters can
be displayed in the live image.
Select the compression method here. H.264 has the highest compression rate. The
following options are available:
Stream 1: H.264
Stream 2: H.264/MJPEG
Select the resolution values here.
Select an image quality level here.
A constant bit rate or variable bit rate can be selected here.
Constant bit rate -> The camera limits the bit rate to the specified value. The
image quality is automatically reduced or adjusted accordingly.
Variable bit rate -> The camera increases or reduces the bit rate depending on
the requirements (up to max. 16 MB/sec). If increased movement occurs in the
video image, then the required bit rate will increase rapidly (H.264, differential image
procedure).
Maximum value for "Constant bit rate" mode
Setting for the displayed video frame rate. The displayed frame rate is strongly
dependent on the network performance (bandwidth).
When using "Multicast", the video data is distributed to the clients from a Multicast
router. The load on the network camera does not increase, even when multiple
users are logged on simultaneously. Enter the IP address of the Multicast router
here.
Network port for data streaming via RTSP protocol.
Horizontal or vertical mirror of live video image
Image exposure mode Auto or manual setting
Setting for the maximum value of the exposure time
Maximum gain value for the video processing
51