Abus TVIP70000 Manuel Utilisateur page 53

PPPoE Setting
PPPoE active:
PPPoE user name:
PPPoE password:
Dynamic IP:
Accept the settings by pressing "Save". If the network configuration is changed,
then the camera must be restarted (System\Management\Restart).
DDNS Setting
DynDNS or DDNS (Dynamic Domain Name System) is a system used for updating domain name entries in
real time. The network camera is equipped with an integrated DynDNS client, which updates the IP address
independently via a DynDNS provider. If the network camera is positioned behind a router, we recommend
using the DynDNS function on the router.
The following diagram offers an overview of accessing and updating the IP address using DynDNS.

192.168.0.3
DDNS active:
Protocol type:
Server address:
Port:
User name:
Password:
Domain name:
You can enter the Internet access data provided by your ISP (Internet service
provider) here manually. This is necessary if the IP camera is directly connected
to the Internet (without a router). Check this box to activate the PPPoE function.
User identification for Internet access (max. 64 characters).
Password for Internet access (max. 32 characters).
Display of the current public IP address.

195.184.21.78

DynDNS
access data
LAN WAN
Check this box to activate the DDNS function.
Select a DDNS service provider here. You must have registered access for this
DDNS service provider (e.g. www.dyndns.org).
IP address of the DDNS service provider.
Network port number of the DDNS service.
User ID for the DDNS account.
Password for the DDNS account.
Enter the registered domain name (host service) here (e.g.
myIPcamera.dyndns.org).
Internet

195.184.21.78  name.dyndns.org
DynDNS.org
name server
53