Waeco AirCon Service Center ASC 3300 G Notice D'utilisation page 93

AirCon Service Center
7.2 Standby menu
The standby menu shows you the current supply quantities and the time
settings of the AirCon Service Center.
The following information is shown:
 Refrigerant quantity
 ASC 2300 G/ASC 3300 G only: Fresh oil quantity
 ASC 2300 G/ASC 3300 G only: UV-additive quantity
 Time
 Date
7.3 Language selection
1. Press the cursor keys  or  to access the basic menu.
2. In the basic menu, use the cursor keys  or  to select "Other
selections":
3. Press ENTER to confirm.
4. Use the cursor key  to select "Service".
5. Press ENTER to confirm.
6. Enter the password "5264".
7. Use the cursor keys  or  to select the preferred language.
8. Press ENTER to confirm.
9. Press STOP. The language chosen is active and the standby menu
is displayed.
7.4 Entering company data
The company data is printed out with every service log.
1. In the basic menu, use the cursor keys  or  to select "Other
selections":
2. Press ENTER to confirm.
3. Use the cursor key  to select "Service".
4. Press ENTER to confirm.
EN
Short selection
Free selection
Other selections
ENTER-OK
Short selection
Free selection
Other selections
ENTER-OK
Initial start-up
93