Waeco AirCon Service Center ASC 3300 G Notice D'utilisation page 107

AirCon Service Center
4. Use the cursor key to select  "Service" and press ENTER to con-
firm:
5. Enter the password and press ENTER to confirm.
– "4910": Monthly report
– "4918": Annual report
If a USB stick has not been inserted or is not recognised, the
"Error 52" message appears.
6. Use the cursor keys  or  to select the required entry and press
ENTER to confirm.
7. The instructions appear on the display.
8. Switch back to the previous selection using STOP.
8.6 Showing the refrigerant consumption on the
display
The station saves the data on the amount of refrigerant filled and
extracted. You can print out this data as an annual or monthly overview.
1. In the basic menu, use the cursor keys  or  to select "Other
selections":
2. Press ENTER to confirm.
3. Use the cursor key  to select "Service" and press ENTER to
confirm:
4. Enter the password "9051" and press ENTER to confirm.
5. Use the cursor keys  or  to select the year and press ENTER to
confirm:
EN
Short selection
Free selection
Other selections
ENTER-OK
Flushing
Reset scales.
Service.
ENTER-OK STOP-EXIT
Service.
2020
Operation
----
107