Waeco AirCon Service Center ASC 3300 G Notice D'utilisation page 103

AirCon Service Center
I
NOTE
For security reasons, a new administrator code must be selected each
time, but not "0000" as this will deactivate the entire function.
Users can be created using the administrator code.
6. Enter the new administrator code:
7. Confirm the new administrator code:
8. Use the cursor keys  or  to select the user:
9. Create the four-digit personal user code (once a code is created
here, the device can then only be operated using this code).
10. Confirm the new user code:
I
NOTE
Use the yellow information key to switch between upper and lower case.
11. Enter the correct user name, and then press ENTER to confirm:
EN
ADM AREA
Insert new code
ADM AREA
Confirm new code
ADM AREA
User number
ADM AREA
User number
Insert new code
ADM AREA
User number
Confirm new code
ADM AREA
User number
User name
John Citizen
ADM AREA
User number
John Citizen
Operation
----
----
1
1
----
1
----
1
1
103