Waeco AirCon Service Center ASC 3300 G Notice D'utilisation page 92

Initial start-up
7 Initial start-up
7.1 Setting up and switching on
1. Wheel the AirCon Service Center to the workplace and lock the front
wheels (9).
I
NOTE
During operation, the device must be on a horizontal, flat surface so that
measurements can be made correctly.
2. Connect the AirCon Service Center to the mains.
3. To switch it on, set the main switch (21) to I.
The software version number appears in the display (6) for several
seconds:
"SW": Software status
"DB": Database
"SN": Serial number
"LF": Language file
✓ The AirCon Service Center then runs a software test.
✓ When the start-up procedure is complete, the AirCon Service Center
displays the following:
– ASC 1300 G:
– ASC 2300 G/ASC 3300 G:
92
Dometic WAECO
ASC2300G SW
DB
SN 230000 LF
Software test.
Please wait
Refrigerant
11:56:35
Refrigerant
PAG oil
UV tracer
11:56:35
AirCon Service Center
AS230107
lhd11802
R1340062
g. 4820
10/03/15
g. 4820
ml 375
ml 313
10/03/15
EN