Publicité
Les langues disponibles
Les langues disponibles
RESOLVING FAULTS ON YOUR OWN
High quality manufacturing processes and use of latest cooling and freezing
technology will principally ensure trouble-free function of your appliance.
If you suspect any fault, before contacting the after-sales service directly or via your
dealer, make sure you have observed all instructions and advice in this user manual.
Repairs by the after-sales service, of faults that have occurred because of
non-adherence to the information and advice given in this manual have to be
charged to the customer and are not covered by your dealer's guarantee.
Attention
The compressor (also known as motor) must not operate continuously.
It is controlled by the thermostat which you set with the temperature control (FIG.4).
It switches on automatically when the set temperature in the storage compartment
exceeds and switches off automatically when the correct temperature is reached
again.
Noise can be heard in every compressor – cooling system when the compressor is
switched on. This noise is produced when the motor in the compressor operates and
also by refrigerant flowing in the cooling system circuit. These noises are normal and
do not indicate any functional trouble
In unheated rooms and in cold weather condition condensation can build up on the
outer walls of the appliance. This does not mean trouble and disappears when the
weather becomes warmer.
-35-
Publicité
