Philips Satinelle Ice HP6492 Mode D'emploi page 11

3 For thorough cleaning you can remove the massaging element
(fig. 11).
4 You can also clean the epilating head (not the appliance!) more
thououghly by rinsing it under the tap (fig. 12).
Never try to detach the epilating discs from the epilating head.
5 Place the epilating head on the appliance and press it onto the
appliance until it snaps home ('click') (fig. 13).
The epilating head can only be fitted onto the appliance in one way.
Cleaning the shaving head
Clean the shaving head after every use.
1 Make sure the appliance is switched off and unplugged.
2 Remove the shaving unit by pulling it out of the shaving head
(fig. 14).
3 Brush the hairs off the shaving unit and the shaving head. Make
sure that you also brush away any hairs that have collected under
the trimmers (fig. 15).
4 You can also rinse the shaving unit (not the appliance!) under the
tap (fig. 16).
5 Put the shaving unit back into the shaving head and snap the
shaving head back onto the appliance ('click') (fig. 17).
Do not exert pressure on the shaving foil to avoid damaging it.
6 Rub a drop of sewing machine oil onto the trimmers and shaving
foil of the shaving unit twice a year.
Storage
1 Put the protective cap on the shaving head (fig. 18).
2 Store the appliance and the accessories in the pouch.
ENGLISH
11