Philips Satinelle Ice HP6492 Mode D'emploi page 10

ENGLISH
10
1 Make sure the appliance is switched off.
2 Remove the skin cooler
3 Remove the epilating head (fig. 7).
Press the release button (1) and move the epilating head in the
direction of the arrow (2).
4 Place the shaving head on the appliance and press it onto the
appliance until it snaps home ('click') (fig. 8).
5 Switch the appliance on by selecting speed II.
6 Place the shaving head onto your skin and move the appliance
slowly and smoothly against the direction of hair growth, while
pressing it lightly (fig. 9).
Cleaning and maintenance
Never rinse the adapter or the appliance itself with water.
Do not use any corrosive detergents, scouring pads or cloths, petrol,
acetone etc. to clean the appliance.
1 Make sure the appliance is switched off and unplugged.
2 Remove the skin cooler from the appliance and slide the
insulating sleeve off the skin cooler.
3 Clean the pivoting cooling head of the leg skin cooler with the
brush supplied or with a moist cloth after each use.
Make sure the outside of the skin cooler is completely dry before
freezing it again.
Cleaning the epilating head
1 Remove the epilating head (fig. 7).
Press the release button (1) and move the epilating head in the
direction of the arrow (2).
2 Clean all accessible parts and the epilating discs with the brush
(fig. 10).