Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
When the oven is working...
Interrupting a cooking cycle
You can stop the cooking process at any time
by pressing the Stop key once or by opening
the oven door.
In both cases:
• Microwave
immediately.
• The grill is de-activated but is still very hot.
Danger of burning!
• The timer stops and the display show the
remaining amount of operating time.
If you wish, at this time you can:
1. Turn or stir the food to ensure it will be
evenly cooked.
2. Change the process parameters.
3. Cancel the process by pressing the Stop
key.
To restart the process, close the door and
press the Start key
Altering parameters
The
operating
temperature) can only be altered when the
cooking process has been interrupted by
proceeding as follows:
1. To alter the time, press key "-" and "+".
The new time defined is immediately valid.
2. To alter the power, press the Power
Selection key. The display and respective
light start to flash. Alter the parameter by
pressing the "-" and "+" keys and confirm
by pressing the Power Selection key
again.
emission
is
parameters
(time
Cancelling a cooking cycle
If you wish to cancel the cooking process,
press the Stop key twice.
You will then hear a beep and the blinking dots
":" will appear on the display.
stopped
End of a cooking cycle
At the end of the process you will hear three
beeps and the display will show the word
"End".
The beeps are repeated every 30 seconds until
the door is opened or the Stop key is pressed.
and
23
USA
Publicité
Chapitres
Table des Matières
