KERN MPS 200K100NM Mode D'emploi page 75

Once installation is complete, check all screws for tight fit. Otherwise the
person to be weighed may suffer an injury.
General direction concerning setting up the previously mentioned scales
Place a personal weighing scale in the intended location and level it with the adjusta-
ble rubber feet until the air bubble in the spirit level (located in the centre of the scale
plate) is in the centre.
When scales with large and heavy platforms are installed and transported (a scale
plate folded upwards), take care not to drop a scale as this could cause its damage.
MPS / MTS / MWS / MXS-BAPS-e-1912
Using the synthetic covers, seal both
holes in the two handrail butts without
cross struts.
25