Télécharger Imprimer la page

DR-HO'S neck pain pro Manuel D'instructions page 11

Masquer les pouces Voir aussi pour neck pain pro:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

ELECTRODE PAD GUIDELINES
• Wash skin thoroughly and then dry
it before applying the electrode
body pads.
• Apply the whole surface of the elec-
trode pads firmly to the skin.
• Do not use electrode pads that do
not stick properly to the skin, or
only partially stick to the skin.
• If the skin looks red after treatment,
you should not treat that area until
the redness has disappeared.
• The electrode pads can be re-used
30 to 50 times depending on your
skin type and other conditions.
Whenever you notice that the pads
are not sticking properly to your
skin, or if the pads feel dry, you
CLEANING & MAINTENANCE
DR-HO'S Neck Pain Pro and Pain
Therapy Device:
• Use a wet cloth or neutral cleanser
to wipe the surface.
• Do not use volatile liquids such as
alcohol, thinner or gasoline.
• Keep well away from moisture, high
temperatures, direct sunlight or
water droplets.
• Please do not disassemble, repair
or rebuild the device yourself
because this will invalidate the
warranty.
• Remove the batteries from the
device if it is not used for more than
3 months.
2023-02-07 DRHO NPP Gold 237100139 Manual EN-NL-FR-GE-ES V02.indd 11
2023-02-07 DRHO NPP Gold 237100139 Manual EN-NL-FR-GE-ES V02.indd 11
should moisten the pads with a
small amount of DR-HO'S Electro
Therapy Conductive Gel using the
spray bottle (do not wash them with
water directly). This will help restore
the adhesiveness and conductivity
of the electrode pads. If moiste-
ning the pads fails to make them
sticky again, they may need to be
replaced.
To order new sets of electrode body
pads and DR-HO'S Electro Therapy
Conductive Gel, please visit the web-
site of your supplier.
Electrode body pads:
• Keep the electrode pads clean
and never expose them to high
temperature and direct sunshine.
• Keep the electrode pads at
temperatures of 5~40°C.
• Gently clean the electrode pads
with a moist cloth or use a brush to
remove dust.
• Do not clean the pads with hot
water or chemicals.
• Do not touch the gel of the pads
with your fingers, as this could
reduce their adhesiveness.
11
04-04-2023 09:44
04-04-2023 09:44

Publicité

loading