ARDES AR7440 Mode D'emploi page 14

14
FIG.14
Maintenance
GB
The appliance does not require particular maintenance; a regular cleaning is sufficient.
Make certain that the appliance is turned off and disconnect the plug from the power outlet before
performing any maintenance or cleaning operation.
Clean the appliance only when it is cool.
The motor base unit (1) must be cleaned with a soft, slightly damp cloth.
Do not use substances, liquids or excessively dampened cloths because any infiltrations could
damage the appliance beyond repair.
Do not use sponges or abrasive products.
Do not use sponges or abrasive products.
Remove the feed channel from the motor unit by holding the lock/release button pressed and
rotating the feed channel clockwise.
Wash all the accessories with water and dish detergent without using abrasive sponges.
Only the steel accessories (star blade and hole plates) can be washed in the dishwasher.
Be extremely careful when handling the star blade, as it is very sharp.
Do not put the aluminium accessories into the dishwasher since they may change colour as a
result of chemical agent aggression.
Do not put the plastic accessories into the dishwasher since the high temperatures may deform
them.
For a thorough cleaning of the conic sieve, remove the plastic adjusting screw before washing it.
Remove the perforated screen by pressing on it and slipping it out (fig. 15).
FIG.15
3C
3B
To reposition the perforated screen correctly on the sieve body, press it in completely and make
certain that the open part of the screen is positioned on the top side of the body.
Make certain that the setscrew located on the conic sieve is tightened in order to prevent loosing
it.
NEVER IMMERSE THE APPLIANCE IN WATER.
FIG.16
3B
3C
3C
3B
14