Télécharger Imprimer la page

Chapin 61575 Manuel D'utilisation Et D'entretien page 7

Publicité

Les langues disponibles

Les langues disponibles

STORING / MAINTAINING YOUR SPRAYER
• The sprayer should be stored out of direct sunlight in a cool dry space.
• Before freezing weather make sure to drain all liquid in the tank, pump, pressure cylinder, hose,
shut-off valve, wand and nozzle, to avoid liquid expansion and cracking in the sprayer components
(See "Cleaning" section). Lock the shut-off valve in the "open" position.
• When service is required call your nearest dealer and always insist on original manufactured
replacement parts.
• Inspect the hose, wand, pump, tank and shut-off valve for wear, damage or leaks on a regular basis
and repair defects promptly.
• Every year prior to spraying remove felt gasket (see Pump Disassembly and Rebuild) and saturate
with a light oil. Oil periodically thru out the season as needed.
TROUBLE SHOOTING YOUR SPRAYER
Symptom
Shut-off leaks
Wand assembly leaks
Nozzle assembly leaks
Hose leaking at shut-off
Hose leaking at pump outlet
Upward pumping action difficult
Downward pumping action difficult
Decline in pump performance (cannot
achieve pressure and/or doesn't hold
pressure)
Possible Reason
Connections loose
Worn or damaged shut-off
Connections loose
Damaged or worn o-ring/gasket
Connections loose
Damaged or worn o-ring/gasket
Connection loose
Damaged or worn o-ring/gasket
Connection loose
Damaged or worn o-ring/gasket
Inlet openings in bottom of piston
cylinder clogged
Piston cylinder check valve stuck
Pressure chamber check valve stuck
Dirt or debris or wear in one or both
check valves
Piston cylinder inside diameter
surface worn
Plunger cup worn
Damaged pressure chamber housing
Incorrect Assembly of plunger and/or
check valve components
6E
Correction
Tighten connection
Rebuild or replace the shut-off valve
Tighten connection
Replace o-ring/gasket
Tighten connection
Replace o-ring/gasket
Tighten retaining nut
Replace o-ring/gasket
Tighten retaining nut
Replace o-ring/gasket
Remove piston cylinder and clean openings
(see section on Piston Cylinder Disassembly
and Rebuild)
Remove piston cylinder check valve cartridge-
Clean, rebuild or replace (see section on Piston
Cylinder Disassembly and rebuild)
Remove piston cylinder check valve cartridge-
Clean, rebuild or replace (see section on Piston
Cylinder Disassembly and rebuild)
Remove both check valves and clean, rebuild
or replace (see section on Piston Cylinder
Disassembly and Rebuild and also section
on Pump Disassembly and rebuild)
Remove piston cylinder and check inside
diameter for wear- replace if necessary (see
section on Piston Cylinder Disassembly
and Rebuild)
Remove pump assembly and check plunger
cup for wear-replace if necessary (see section
on Pump Disassembly and Rebuild)
Remove pump assembly and replace
pressure chamber housing (see section on
Pump Disassembly and Rebuild)
Refer to section on Pump Disassembly and
Rebuild and Piston Cylinder Disassembly and
Rebuild

Publicité

loading