GENERGY LIMITED 2000I INVERTER Instructions D'utilisation page 44

3.1 Main control panel
1 - Overload indicator
3 - Lack of oil alarm indicator
5 - Fuel valve
7 - Thermal circuit breaker for DC 12V
9 - Ground wire connection
11 - Socket
4. Checks before use
4.1 Battery connections (E-START models)
1. Remove the 4 screws from the maintenance cover.
2. Connect the battery terminal to the engine head, fixing with a M6 nut, according
to the figure below.
2 - Output indicator 230V
4 – Overload restart - Switch V-HZ-HOURS
6 - Start button
8 - Socket DC 12V
10 - ECO mode switch
12 - Output power indicator (approximated)
41